Precision CNC Machining
|
Sheet Metal Fabrication
Opto-mechanical Component
Machining
CNC Milling and Turning
Precision Laser Cutting
Electro-Mechanical Assembly
MIG/TIG Welding
Custom Electronic Enclosures
Design Engineering Support
Prototype to Production
Quantities |
 |
Probe Body – Made from 6061-T6 aluminum with clear
anodize finish. Measures 1.875” x 3.2” and is part of a
laboratory instrument. |
|
| Atomizer – Manufactured for a laboratory instrument, this 9 piece
assembly has 8 parts machined from 316L stainess steel and 1 part
machined from Delrin. After welding, the assembly is mechanically
polished and electro- polished. Fine surface finishes are required to
minimize lodging of particulates. A .013" cross hole is drilled and must
be completely burr-free. |
 |
|
 |
Heater Block – Tolerances are critical to this part
used in an analytical instrument. Measures 1.16” x .75”
and made from 6061-T6 aluminum with electroless
nickel finish. |
|
| Upper Cam – Made from 6061-T6 aluminum with
hardcoat anodize. Extremely tight toleranced part for
a laboratory instrument measuring 2” x 1.5”. |
 |
|
 |
Vacuum Manifold – Close tolerance part used in an
analytical instrument. Made from 6061-T6 aluminum with
electroless nickel finish. Measures 5” x 3.5”. |
|
| Lens Housing – Machined from black Delrin,
this is part of a surgical illumination device.
Size is 1.66” x 1.05”. |
 |
|
 |
Front Cover – Machined from 6061-T6 aluminum and
measures 12” x 9” x 2.5”. Assembled with helicoils and
standoffs. Used in the aerospace industry. |
|
| Rear Thermal Bar – Machined from copper and
used in the analytical instrumentation industry.
Part measures .625” x 1.25”. |
 |
|
 |
Hollow Arm Shaft – Used as part of a robotic laboratory
instrument requiring exacting tolerances. Made from 304
stainless steel with heavy reground industrial chrome
finish. Measures 5” x 1.5” in diameter. |
|
| Imager Housing – Machined from 6061-T6 aluminum
with an anodize finish and measures 4” x 2.5” x 2.5”.
Extremely tight tolerancing of several features. Housing
for an infrared camera. |
 |
|
 |
Cover – Machined from 6061-T6
aluminum and zinc plated. This part
measures 15.25” x 6.75” x 1” and is
assembled with hardware and heatsinks.
Part of a ruggedized computer. |
|
| Vertical Drive Assembly – Part of an analytical
instrument, the machined parts in this assembly are made
from 6061-T6 aluminum and stainless steel and include
polymer bushings. Measures 8” x 4.5” x 4.5”. |
 |
|
|
|
12130 Brockton Lane
Minneapolis, MN 55369
|
